If you have been through your options and decided that laminate flooring is the best choice for you, then you may find that completing the process of installation yourself could be a more cost-effective way of getting the job done. If you have made the decision to try laminate flooring installation yourself, the first thing you will need to do is that you make sure that you have all of the necessary equipment gathered for you to complete the task. This means that you will need the right amount of laminate flooring ready, as well as instructions that are designed particularly for the type of laminate flooring you have chosen. The basic tools that you will typically need to install a laminate floor properly include;

Utility Knife
Tape Measure
Carpenter’s square
Pull bar
Dividers and spacers
Floor cleaner

Installing your Laminate Flooring

When it comes to a DIY laminate floor installation, there will be some necessary materials you need to complete the instructions properly such as barrier sheeting, end molding, base-boards, laminate glue and plastic sheeting to protect your furniture.

Depending on the style of your flooring, you will probably find that your installation instructions vary slightly. However, it’s usually a good idea to start at one end of the room and work backwards towards the other. Remember to place spacers along your walls to properly set up your expansion zone, and after you lay down your first tile or board, work along towards the right of the room, measuring the distance between the end wall and the last board. Most experts suggest that you should take about 6mm of distance from the total distance before you make the final cut for the last board, which will be placed against the wall. You may need to use a pull bar to ensure that the piece of laminate falls into place properly.

See also  Log Homes – Why to Choose Kiln Dried Logs?

Remember that when you are cutting your laminate flooring to fit the room you have chosen to decorate, it is important to your laminate floor installation to cut with the decorative design facing upwards. By cutting with the design face-up, you can typically avoid any chipping or major damage to your pieces, which is especially useful if you want to create a smooth, overall professional look in your flooring. To purchase the best laminate flooring,

Leave a comment